...
To focus a camera on a particular area, simply Ctrl+Right Click the area you wish to target and the camera will move to dwell there:
...
Using the Selection Menu
There is a quick way of accessing selecting the Height Map for a cameracamera - this then displays the mini control:
The Selection Menu is accessed by a long left click on the PPI Map on the camera you wish to access.
The The Selection Menu will open. Using the curser, you can select the camera to open the Height Map:.
:
Accessing the Height Map
You can now view/hide the height map by toggling it on and off via the Camera Mini Control:
Camera Modes
Automatic: The camera will be controlled automatically by AdvanceGuardĀ® based on the camera and camera group configuration. The automatic following of targets is controlled through the use of rules.Mirror: This setting allows the camera to mirror a master camera in either automatic or manual mode.
Manual: The camera can only be controlled and moved by an operator.
Info |
---|
If the camera has been set to Mirror Mode then the Camera Modes will not be available. |
Camera Mode Change
The camera mode change in the Camera Mini Control is an operators feature:
...
When a target has been selected for latching, a free camera capable of latching will follow the target.
There are two ways to latch:
Select the Follow / Latch Targeticon, which is outlined in pink in the image below, on the Selected Track Mini Control:
Right-click the target.
The FOV outline (in pink) will appear when the camera is active and disappear when the camera is inactive.
...