Page Comparison

...

The configuration in Witness AdvanceGuard® is also included.

Contents

...

In order to control the cameras within Milestone via the AdvanceGuard® UI, you will need to configure the same user with the same password for both in AdvanceGuard®:

1. In the Configuration Tree in the Live screen, select the Milestone Plugin which is under Integration Configurations. This will display the Milestone Plugin information on the right-hand-side. Click Edit:
   

   Image RemovedImage Added

2. Then ensure that the Milestone Plugin is enabled, and that the Milestone Server IP address is correctly entered, and the User Name and Password are is the same as entered into the Milestone services. Save the configuration:
   

   Image RemovedImage Added

3. Next select the VMS Camera Control branch and click New:
   

   Image RemovedImage Added

4. Then select Milestone Configuration:
   

   Image RemovedImage Added

5. This will open the Create New Milestone Configuration wizard. Select Finish:
   

   

6. Enter the Milestone Server IP Address, along with the same User Name and Password as in step 2, and click Save:
   

   

7. Then configure a camera to use Milestone Camera Control; there is a drop down option to select Direct Control (ONVIF) or the Milestone connection:
   

   Image RemovedImage Added

8. ​Select the Milestone option. There is a Link Camera option. The Link Camera icon button will be displayed in red as no camera have yet been linked:
   

   

9. Selecting the Link Camera option opens a list of cameras on the Milestone system. Select a camera on the list to assign the camera in WitnessAdvanceGuard®:
   

   

10. Once the camera has been linked, the Link Camera button turns white:
    

    

11. Once the configuration has been saved, the External ID will be displayed in the Advanced tab:
    

    

...