...
Closest mode causes all cameras within the group to follow only the objects that are in their immediate vicinity.
Timeshare mode causes all cameras within the group to spread themselves between tracks, spending an adjustable amount of time on each, before moving to the next tracked object.
Static mode is designed for use only with Static Camerasstatic cameras. Although static cameras can never be moved, they can participate in automatic control groups to display targets in their field of view (FOV). However, once a camera is placed in a static group it will never be tasked for automatic tracking. This does not have any impact for any camera enabled for latching, they will still operate as expected. Like automatic control, a static camera can latch in order to display targets in their FOV.
...
In the example below, the camera is in the Timeshare Group, as displayed in the Configuration Tree. It is circled in pink on the PPI Map has been selected by left-clicking on it. This will open the Camera Mini Control on the right-hand side:
...
To focus a camera on a particular area, simply Ctrl+Right Click the area you wish to target and the camera will move to dwell there:
...
The Camera Mini Control offers you the following options to aid the operator:
Viewer: This opens the Viewer. Please see the section below on Using a Viewer.
...
Height Map: These are very useful where a single camera needs to cover a region that has differing ground heights within it. Each Height Map is made up of grids, and each grid has a Height Offset option which allows you to inform the camera that when it is viewing that grid it should make tilt adjustments to account for the height difference. For further information please go visit to the Height Map page.
Using the Selection Menu
...
The Selection Menu is accessed by a long left click on the PPI Map on the camera you wish to access.
The The Selection Menu will open. Using the curser, you can select the camera to open the Height Map:.
You can now view/hide the height map by toggling it on and off:
Camera Modes
Automatic: The camera will be controlled automatically by AdvanceGuard® based on the camera and camera group configuration. The automatic following of targets is controlled through the use of rules.
...
Manual: The camera can only be controlled and moved by the an operator.
Camera Mode Change
...
It allows you to switch between Automatic and Manual camera mode. This option means that an operator you can quickly take manual control of a camera to follow a target and then, once they you have finished their the task, you can return the camera to the Automatic setting.
...
For further information about cameras, please navigate to the Cameras section page.
Using a Viewer
Video viewers allow video inputs from cameras to be displayed for the operator when required. Most usually, video viewers are used in conjunction with optical or thermal imaging cameras that can be called upon when an incident occurs in the areas that they cover.
...
The direction keys are used to direct the view of the camera up-down and left-right, whilst the and are used to zoom in and out.
The ✖ is used to close the Viewer viewer window.
The bar at the top labels the Viewer viewerand the Camera camera the Viewer viewer is streaming from.
The window controls are to maximise/minimise the Viewer viewer window, or to exit.
In the example below, the camera has been automatically tasked by the system to follow the Track. The operator has selected the Viewer viewer (circled in orange) from the Camera Mini Control which has opened the Viewer viewer on the top left of the PPI Map, and also the Viewer Mini Control, highlighted on the top right. The track and camera have been highlighted in the middle of the PPI Map:
...