Introduction
The SafeGuard SafeGuard™ software directly supports the Advantech ADAM 6060 Ethernet relay device. This supports 6 six relays and is driven by the Modbus over TCP protocol. Details of the unit can be found here.
This section covers configuring the SafeGuard SafeGuard™ system to connect to the ADAM device.
...
The IP address for the relay unit is set on the Radar Configuration page.
Set the IP address of the ADAM unit and hit Apply followed by Commit Changes. The radar will now attempt to connect to the relay unit.
...
| Info |
|---|
Be aware that the ADAM relay index is zero based - so relays available are 0 - 5. SafeGuard SafeGuard™ areas are numbered 1-6. |
...
Related Information
...