...
Create rough initial outlines for the Detection Area(s).
Use live radar data to fine tune the area outline according to how the radar sees the surrounding environment. For example the radar can see trees, hedges and buildings. So you can use this information to ensure your detection area is optimal for your site.
| Tip |
|---|
Remember that the HDR radar all Navtech radars offers centimetre accuracy so you can refine the placement of your detection areas to the same accuracy. |
...
Radar Detection Area Setup
There are two approaches for easily configuring detection areas for the radars on your site. The global approach and the per-area approach. The global approach is great for a quick, fast setup but the per-area method is more appropriate when you want to apply your detection area to specific radar and where you want to use different tracking parameters for each radar.
Global Radar Detection Area
This method will configure all available radar that overlap with this detection area to use it combined with the selected tracking parameters. This is a quick and simple method to configure all radar to use your detection area. Further configuration with additional detection areas and alternative tracking parameters may be required on more complex sites.
| Info |
|---|
When using this global setup option be aware that it will replace any existing detection area and tracking configuration setups you have on your radars. |
1. Select the site in the Configuration Tree, then select Radar Detection Area Setup in the Configuration Panel.
...
| Info |
|---|
Learn how to manually assign Tracking Parameters on the Detection Areas page. |
Assigning
...
a Detection Area
...
to Selected Radar
This approach allows you to assign your detection area to only the radar you want and also allows you to select different tracking parameters for each radar.
1. Long left click the detection area to open the Radial Menu and select the Radar Parameter Modification:
...
2. This will open the Radar Parameter Modification screen. This will display a list of all available radar:
...
3. Select the desired Tracking Parameter from the drop down list for each radar and select Apply.
...
| Info |
|---|
If you do not select a tracking parameter then the detection area will not be assigned to that radar. This allows you to choose which radars you want to configure for the selected detection area. If you wish to remove this detection area from a previously configured radar then select the remove (X) button. |
Video
...
Fine Tuning Detection Areas
...