...
| Info |
|---|
The behaviour of the AdvanceGuard® Mobile Client will reflect the configuration of the AdvanceGuard® application. For example; a user logged into the Mobile client will have the same permissions as in the main application. Unlike the main Windows application, these permissions cannot be set using the Mobile client, they must be configured in the main client. |
...
Alarm: Opens or closes the Alarm Panelpanel.
Notifications: Notifications will show for a short period before disappearing.
...
It is possible to change the System Mode or System Profile by selecting one the entries:
...
This will open the Change System Mode or Change System Profile Dialogue dialogue:
...
The operator can then quickly change the Mode or Profile.
System Menu
Clicking on ☰ will open the System Menu:
...
Map: The default Google road map.
Satellite: Google road map with the Google satellite overlay.
Terrain: The Google terrain map.
OSM: An alternative road map provided byOpen Street Map.
Home Style
This allows the choice of a simple or full PPI Navigation Control:
Simple: The user can navigate using keyboard or mouse and return to the origin:
...
Alarm: Opens or closes the Alarm Panelpanel. If there are active alarms, then the alarm symbol will be red. If there are no active alarms, then the symbol will be black. The Alarm Panelpanel will show the following fields for each Alarmalarm:
Severity: Defines the severity of the rule broken by that track.
...
Live alarms will appear in the Live Alarms list as they are triggered:
...
Select the Locate icon to pin-point the location on the PPI:
...
Select this button to clear the selected alarm:
...
This tab will only be available if the Auto Acknowledge setting has been disabled in Settings > System Settings > Alarm Options.
...
Select the Locate icon to pin-point the location on the PPI:
...
Select the icon below to acknowledge the alarm:
...
This can be changed by clicking on the camera:
...
This will load the Camera Info Panel panel. The user can change the Operation Mode setting by clicking on the Automatic label to change it to Manual Override and vice versa:
...
A camera can be selected to follow a target on the Mobile client in two ways:
1. Right click a target to latch a camera. This will force the target to be followed by the most appropriate camera until the latch is cleared:
...
2. Left click a target to open the Track Info Panelpanel, and then click on the Follow Target icon to change the setting to Following:
...
If no camera is selected, then the Camera Controller will select the most suitable camera to view the selected location. This will depend on a number of factors including range, configured camera areas and availability. If a camera is selected then this will be the camera that is used to view the selected location.
...
The user can Alarm or Disarm an area by left clicking it and selecting the Arm / Disarm option from the area Info Panelpanel:
...
This will activate the Radar Info Panel panel. The user can change the area type from Alarmed to Not Alarmed (and vice versa), by clicking on the Alarmed or Disarmed button.
...
This will open a Timeout dialogue which has the same time out settings as the Entity Timeouts in the main application. The user can then select the desired timeout period of 5m to 125m; after which the area will automatically revert to the previous state. The Immediate option bypasses the timeout and indefinitely fixes the area at the selected state.
...
This will open the Set Tag And Severity Panel panel:
...
This will show the Tag Preset options configured in System Settings.
...