Introduction
This section labels the main aspects of the AdvanceGuard® Web UI display.
| Info |
|---|
The behaviour of the AdvanceGuard® Web UI will reflect the configuration of the AdvanceGuard® application. For example; a user with a set of user permissions in the application, will have those same permissions in the Web UI. |
Contents
...
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
...
Main Display Features
...
System Menu: Opens or closes the System Menu.
...
Notifications: Notifications will show for a short period before disappearing.
System Menu
Site Map
This will open or close a moveable dialogue to navigate to parts of the site. Double-clicking an entry will automatically move the map to show the location of the entity.
...
Map Style
This offers the following map styles:
...
Terrain: A terrain map.
OSM: Open Street Map
Home Style
This allows the choice of a simple or full PPI Navigation Control:
...
Full: The user can also navigate around the map using the pan arrows:
...
Query
Recent Tracks: This offers a view of tracks from 5 minutes to 48 hours ago. Selecting a particular track will display track data.
...
Clear: This will clear the screen of selected tracks.
...
Alarm Panel
...
Alarm: Opens or closes the Alarm Panel. If there are active alarms, then the alarm symbol will be red. If there are no active alarms, then the symbol will be black. The Alarm Panel will show the following fields for each Alarm:
...
Locate: Select locate to automatically pan the map to show the location of the alarm.
Acknowledge: This will remove the alarm from the list if the setting is enabled.
Live Alarms
Live alarms will appear in the Live Alarms list as they are triggered.
Pending Alarms
The pending acknowledgement list shows all alarms which have been cleared but not acknowledged.
...
When acknowledging an alarm the following dialogue is displayed if the Require Acknowledge Details flag has been set in Settings > System Settings > Alarm Options, thereby also allowing the user to make any notes if necessary:
...
System Alarms
These are typically health and configuration alarms which are only raised if a problem has been detected with the overall operation of the system.
Cameras
Camera Operation Mode
This can be changed by clicking on the camera:
...
This will load the Camera Dialogue. The user can change the Operation Mode setting by clicking on the Automatic label to change it to Manual Override and vice versa:
...
Follow Target
A camera can be selected to follow a target on the Web UI.
...
3. The system will then set the camera to follow the target whilst it is within the range of the area:
...
Moving a Camera
It is also possible to move the focus of a camera (outlined in pink):
...
By right clicking the spot that you wish to aim it at:
...
Arm & Disarm an Area
The user can Alarm or Disarm and area by left clicking it:
...
In the example below, the Path area has been disarmed, so the alarm will no longer be triggered by a target in that area:
...
Related Information
| Filter by label (Content by label) | ||||||
|---|---|---|---|---|---|---|
|