...
| Info |
|---|
For customers and integrators intending to use the Integration Simulator, the documents assume a reasonable working knowledge of network communication. They are targeted at technical teams, typically with software development skills, who are integrating the output from Witness into external systems. |
Contents
...
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
...
Please see the details for each integration plugin:
...
These buttons provide options to manage the simulator configuration:
Configure Radars - allows you to change the number of radars to simulate - both for alarms and health.
Save Configuration - enables you to force the configuration to be saved.
Reset Configuration - resets and reloads the configuration. This option honours the configured number of radar but it will also reset the data to the last saved state. This enables configs to be saved and moved to a different PC if required.
Security Alarms
Allows you to create, publish and clear security alarms:
...
Adding Alarms
To add a new alarm:
...
1. Select Add Alarms.
2. Edit the alarm details.
3. Repeat steps 1 & 2 as required.
4. Once ready, select Send Alarms to publish the configured alarm list.
| Info |
|---|
You can add several alarms at the same time. Once added, you will be able to edit any of these alarms by selecting them in the active list. However as soon as you select Send Alarms you will only be able to edit the alarm severity. Once you have sent the alarm list, the clear and acknowledge alarms options will become available. |
Update Existing Alarm
To update an existing alarm:
1. Select the alarm you wish to update.
2. Change the severity (this is the only property available to change after you have published the alarms at least once).
3. Select the Send Alarms.
Clearing Active Alarms
To clear active alarms:
...
1. Select the required alarms from the active list.
2. Select the Clear Alarms button.
Alarms will be marked as cleared in the list and alarm updates will be automatically published.
...
To acknowledge a cleared alarm:
...
1. Select the cleared alarms you wish to acknowledge.
2. Select Acknowledge Alarms.
The alarm will be acknowledged and automatically removed from the list. Alarm updates will be automatically published.
...
To send a camera control:
1. Select a camera from the list.
2. Enter a movement type and relay Id, if required.
3. Select the Send Camera Command button.
Tracks
Allows you to create and publish tracks. Tracks can include the normal position and movement data as well as broken rule information.
...
Add Track - allows you to enter new track details
Send Tracks - select this to publish the active list of tracks
Clear Tracks - select this to clear the selected tracks
To add tracks:
...
1. Select Add Track.
2. The track will be added to the active track list with default data.
3. Edit the settings to suit your testing.
4. Repeat these steps to add more tracks if required.
5. To send the active tracks, select the Send Tracks button.
6. To include rule Ids in the track broken rule data, select the required rules from the rule list before sending the tracks.
| Info |
|---|
Once you have added a track, you can easily change the track attributes by selecting it in the list and then changing the attributes in the Tracks form. This allows you to add multiple tracks with the ability to update them as required. The tracks will remain editable even after you have selected Send Tracks. Each time you select Send Tracks the same tracks will be sent but with whatever values have been set in the Tracks form. This gives you the ability to simulate a moving track. |
To remove a track:
1. Select one or more tracks from the active tracks list by using the Remove checkbox column
2. Select the Clear Tracks button.
Highways Simulator
The included Highways Simulator simulation plugin can be used to set up Carriageway and Radar entities and can also be used to create carriageway statistics and highway alarm messages.
...
| Tip |
|---|
You can pass configuration from one computer to another using save and load. |
Sending Statistics
We can use the commands available in the Carriageway Statistics section to send statistics or traffic analysis reports.
...
The alarms are only send to the integration plugins on clicking the "Send Alarms" button.
...
Related
...
Information
| Filter by label (Content by label) | ||||||
|---|---|---|---|---|---|---|
|
...