Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Reverted from v. 32

Introduction

The Rule Nodes are the building blocks for all rules. They control the logic and actions for each rule. The combination of nodes and associated logic enables you to build powerful rules that can intelligently analyse activity on your site and alert the operator only when required.

All nodes can be configured. Basic nodes, such inputs, only require a name and Id, however others, such as the checks, require more detailed configuration to ensure they are optimised to perform as required. Each node is covered here, including their configuration options.

Contents


Table of Contents
maxLevel3
indent16px
excludeIntroduction|Contents

Inputs

Inputs are the first stage in the rule workflow. They provide the initial trigger and the data to be processed by the checks. The three options are:

External Input

A trigger from an external system or digital input.

Image RemovedImage Added

Time Input

A time based trigger which fires based on a configured interval. This is used to drive scheduled based actions.

Image RemovedImage Added

Track Sighting Input

A trigger from a track sighting. Each new track sighting creates its own trigger.

Image RemovedImage Added

Checks

Approach Check

Checks if the track sighting is approaching an Area.

Image RemovedImage Added

Area: specify the Area from a list of existing Areas.

Check: specify whether the rule is broken when it is greater than or less than the value

Max Distance: a target is not allowed within the specified distance of the Area.

Max Time: atarget is not allowed within the specified time of the Area base on the targets approach speed.


Area Check

Checks if the track sighting has entered an Area.

Image RemovedImage Added

Check Time: at what time the check is performed.

Now: the current track being evaluated is in the area at this moment in time.

Anytime: the check will evaluate to true if the track has been in that area at any time. This enables us to look historically where a track has been. For example, if you wanted a rule break when a track has moved through area A into area B, then area A would be an anytime check and area B would be a now check. You would use a Boolean Link specified AND to link these Area Check nodes together in the rule logic.

Area: specify the Area from a list of existing Areas.


Area Exclusion Check

Checks if a track has not entered one or more alarm areas.

Image RemovedImage Added

Selected/Name: select the alarm areas that will not be checked for track sightings.


ATI Check

Checks if the track sighting has originated from an area.

Image RemovedImage Added

Area: specify the Area from a list of existing Areas.


Breach Line Check

Checks if a Track Sighting has crossed a defined line.

Image RemovedImage Added

Breach Line: select from a list of existing Breach Lines.

Min Seen: minimum number of track sightings required to confirm that the line is breached.

Reset Time: length of time (s) allowed between track sightings before Seen value is reset.


Breach Line Proximity Check

Checks if an unknown Track Sighting is within a defined distance of an IFF track and a specified classification and is within a certain defined distance of a selected breach line it would be marked as a friend.

Image RemovedImage Added

Breach Line: select from a list of existing Breach Lines.

Classification for IFF Track: select the desired object from the drop down list.

Classification Check

Checks if the Track Sighting has been classified against a particular model.

Image RemovedImage Added

Classification: select the desired classification model.

Probability: the probability above which the track sighting has to be

Count Check

Checks if the required number of Track Sightings have occurred within a given time period.

Image RemovedImage Added

Area: specify the Area from a list of existing Areas.

Count: the minimum number of track sightings required within the time period.

Time Frame: specify the length of the given time period in seconds.


Density Check

Checks if an Area has the required density of Track Sightings within a given time period.

Image RemovedImage Added

Area: specify the Area from a list of existing Areas.

Density: the minimum and maximum number of tracks in the Area, in the Time Frame, required to satisfy the Density Check.

Time Frame: specify the given time period in seconds.


External Trigger

Checks an external sensor input with debounce.

Image RemovedImage Added

Debounce Period: ensures that only one digital signal can be registered within this given time.


Filtered Property Check

Check if a property of a Track Sighting meets the defined criteria after previous rule checks have passed.

Image RemovedImage Added

Property Name: name of property to check on a track sighting

Property Test: select the type of test to perform on the property


Property Check

Check if a property of a Track Sighting meets the defined criteria.

Image RemovedImage Added

Property Name: name of property to check on a track sighting

Property Test: select the type of test to perform on the property


Proximity Check

Check if the Track Sight is within the given proximity of other sightings.

Image RemovedImage Added

Use Time: select between Time or Distance:

Proximity Time: specify the number of seconds between tracks.

Proximity Distance: specify the maximum distance (m) between tracks that satisfies the Proximity Check and triggers an action i.e. the ≤ distance between tracks at which they are considered in proximity to one another.

Area: specify the Area from a list of existing Areas.


Radar Check

Check if the Track Sighting was generated by the specified radar.

Image RemovedImage Added

Rule Broken Check

Checks if the Track has broken any of the selected rules.

Image RemovedImage Added

Selected/Name: select the rule(s) that will checked to see if a track sighting has broken them.


Rule Disarm Check

Checks an external trigger to disarm the rule.

Image RemovedImage Added

Trigger Id: the Id of the external trigger's input.

Disarm Timeout (s): the time period, without an external trigger, after a rule has been disarmed before the rule is armed again.

Debounce Period (s): ensures that only one digital signal can be registered within this given time.


Schedule Check

Checks if the track sighting recorded time or time input occurred within the given schedule.

Image RemovedImage Added

Schedule: one or more schedules to check.


Static Sensor

Checks if the track sighting was generated by the specified sensor.

Image RemovedImage Added

Debounce Period (s): ensures that only one digital signal can be registered within this given time.

Static Sensor: specify the sensor from a list of existing static sensors.

Allow Notifications: when ticked will cause static sensor to animate in UI when triggered


System Mode

Checks the current system mode.

Image RemovedImage Added

System Mode: select the desired mode.


Track Tag Property Check

Will return true if any track’s tag is equal to any added tag target name.

Image RemovedImage Added

Tag Name: add a Tag Name to the Tag Target Names list.


Checks multiple inputs using the specified logic type. In most computer programming languages, a Boolean data type is a data type with only two possible values: true or false. The values we use are Both, Either or None.

Image RemovedImage Added

And/Or: a boolean AND or boolean OR operation

Not: a boolean NOT operator


Break Count Check

Checks if the total break count for inputs has exceeded an amount.

Image RemovedImage Added

Delays input and check passing through to an action for a specified time period.

Image RemovedImage Added

Time Frame (s): the length of the delay in seconds.


Creates a window of time in which checks must be satisfied. Solo checks with an internal Time Frame will render a Time Link null, but multiple checks with an internal Time Frame can feed into a Time Link. A Time Link compares inputs from other checks to ensure that it got a “true” from all the linked checks with the specified time, regardless of Time Frames determining their "true" or "false" outcomes.

Image RemovedImage Added

Time Frame (s): specify the time frame in which the check must be satisfied.


Actions

Alarm

Generates an alarm

Image RemovedImage Added

Priority: allows you to optionally apply a ‘weighting’ to any rule breaks that invoke an alarm using comparative values.

Severity: defines how a target should be marked when it breaks a rule and actions an alarm. Such markings allow a target to be easily differentiated.

Add Properties: this section defines how the description will read when an alarm notification pops up. When a rule is broken the text that has been placed into the Description field of the rule is displayed on the operator’s console and is also recorded within the alarm log. This text can be completely static (causing it to give the same message regardless of where, or by what means, the rule was broken). Alternatively, it can also include placemarkers that will be replaced by contextual references (when the rule is broken) that may help to pinpoint the nature of the alarm. Select a Check node and then one of its settings/properties to add detail to the description.

Node: select from the nodes of checks used in the rule. 

Property: select a property from that node you would like to include in the description, then select the add button ➕. 

Configured Properties: a list of the Node Properties already added. Each is given a code, an 'Arg'. This table functions as a Key for what the 'Args' represent. 

Description: determines the text that will be presented to the operator (and entered in the activity log) when the alarm sounds.  Right Click to add an Arg to represent a Node Property. In the example below, Arg0 represents a specific Area, and Arg1 represents the Approach Area Check Node's Distance Property i.e. an approaching person is within 15m of the Area.

User Notification: determines which users will receive the alarm notifications


Area State

Enable or disable the selected area.

Image RemovedImage Added

Enabled: state to set the area to.

Area: specify the Area from a list of existing Areas.

Action: input will track the input state and set the output, latched will set the state once until the input state resets.


Breach Line State

Enable or disable the selected breach line.

Image RemovedImage Added

Enabled: state to set the area to.

Breach Line: specify the Breach Line from a list of existing Breach Lines.

Action: input will track the input state and set the output, latched will set the state once until the input state resets.


Camera

Creates a camera target.

Image RemovedImage Added

Camera: specify the camera you wish to use from a list of existing cameras.

Priority: allows you to optionally apply a ‘weighting’ to any rule breaks that invoke a camera target using comparative values.

Keep Following: keep following after the condition clears.

Position Override: optionally override the camera position to point at a specific entity


Camera Home Position

Modify a camera home position

Image RemovedImage Added

Camera: specify the camera you wish to use from a list of existing cameras.

Active Home Position: when the input state is active set the home position of the camera.

Inactive Home Position: then the input statis inactive set the home position of the camea.


Camera Mode

Modifies the cameras mode.

Image RemovedImage Added

Camera: specify the camera you wish to use from a list of existing cameras.

Automatic: mode to set on the camera

Action: input will track the input state and set the mode, latched will set the mode once until the input state resets.


Change Classification

Changes the classification of a track to the specified classification and sets the probability at 100%.

Image RemovedImage Added

Classification: the classification the track will be changed to, e.g. Person.

Persists: select to ensure the track classification does not change in the future. 


Change Profile

Apply the selected system profile.

Image RemovedImage Added

Action: input will track the input state and set the output, latched will set the state once until the input state resets.

Active Profile: the profile to set change to


Colour Change

Change the colour of the selected entity.

Image RemovedImage Added

Entity: select the required entity from the drop down list.

Colour: this can be configured to any RGBA colour.


External Trigger

Creates a trigger for an external action.

Image RemovedImage Added

Output Id: the output of the external object.

Event State: state to set the trigger to.

Action: input will track the input state and set the output, latched will set the state once until the input state resets.


Folder Action

Apply an action to the selected folder.

Image RemovedImage Added

Folder: specify the Folder from a list of existing Folders.

Enabled: state to set the folder to.

Hide Children: select to render entities within that folder invisible on the PPI.

Action: input will track the input state and set the output, latched will set the state once until the input state resets.


Hide Entity Action

Hide a selected item.

Image RemovedImage Added

Entity: select the entity to be hidden from the drop down list.

Hide: check box is not selected by default.

Action: input will track the input state and set the output, latched will set the state once until the input state resets.


Layer Action

Add or remove a layers from the users listed.

Image RemovedImage Added

Hide: select to hide, or remove, the specified layer from the specified users.

Layer: select the layer to add or remove from those available to the specified users. 

Action: input will track the input state and set the output, latched will set the state once until the input state resets.

User Names: specify the user(s) that the layer will be made available to or removed from. 


Message

Create a notification message.

Image RemovedImage Added

Title: the header text of a notification.

Message: the main body of text.

Severity: defines how a message should be marked.

Icon Image: icon to use in message notification.


Permission Action

Select to change the roles permissions. Individually select from the options below to determine which permissions will be enabled or leave unchecked to disable.

Image RemovedImage Added

Role: role to change the permissions of.


Rule State

Enabled or disable the selected rule.

Image RemovedImage Added

Enabled: select to enable a disabled rule. Leave unchecked to disable an enabled rule.

Action: input will track the input state and set the enabled state, latched will set the enabled state once until the input state resets.

Rule: specify which rule to enable/disable.


Track Hide 

Hide a track from the UI

Image RemovedImage Added

Track Status

Alter the severity of a track.

Image RemovedImage Added

Severity: set how a track should be marked. Such markings allow a track to be easily differentiated.

Related information

Filter by label (Content by label)
showLabelsfalse
cqllabel in ( "nodes" , "rule" , "rules" ) and space = "TUN"