Versions Compared

Old Version 17

changes.mady.by.user Guy Avery (Deactivated)

Saved on

compared with

New Version 18

changes.mady.by.user Guy Avery (Deactivated)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Select the Profile button in the main application title bar. The button will display the name of the currently selected profile i.e. Default.

    Image RemovedImage Added

  2. Use the Profile drop down to select a new profile:

    Image RemovedImage Added

  3. Select OK to save, and change profiles.

  4. You will see a notification informing you the profile has changed and the profile name will name be displayed on the Profile button

...

  1. Go to System Menu>Settings>System Settings>System Profiles. 

  2. In Edit mode, select the Add System Profile button:

    Image RemovedImage Added

  3. The Add System Profile window will open.

  4. enter the Name and ID of your profile and select OK.

    Image RemovedImage Added

  5. The new profile will appear in the System Profiles table.

  6. Select Save. Currently, it will be as blank as a Default profile, so you must next configure the profile.

    Image RemovedImage Added

Configuring a Tracking Parameter Profile

  1. Enable the Config Function, then select a Tracking Parameter in the Configuration Tree.

    Image RemovedImage Added

  2. In the Configuration Panel, select Profiles. 

    Image RemovedImage Added

  3. A new window, Tracking Parameter Profiles, will appear. 

  4. If no profile has as yet been added, the table will be empty, because the Default profile does not appear, as it is locked from configuration. Default values will always be 0. 

  5. However, in this example, we have added a new profile. Select the new profile (in this case Light Rain) from the table, then select Add.

    Image RemovedImage Added

  6. The Tracking Parameter Profile delta options will appear. Input your global delta changes.

  7. Please refer to the Tracking Parameters for more information about these settings.

  8. Select Save when finished.

Tri-State Control

Note that some of the properties, such as Wake Suppression, have check boxes which are tri-state. This means they can be:

  • Not Set - means that when the profile is applied this setting will not change anything

  • Disabled - this means when the profile is applied the setting will be disabled

  • Enabled - this means when the profile is applied the setting will be enabled

Other options, such as Clutter Control Enabled, have to be enabled to select settings that will be applied when the profile is selected, If the setting is not enabled the profile will not change this configuration when applied.

...

Configuring a Tracker Profile

...

Related information

Filter by label (Content by label)
showLabelsfalse
cqllabel in ( "tracking" , "parameters" , "profiles" , "settings" ) and space = "TUN"

...