Page Comparison

...

1. Find the Profile button in the top right hand corner of the UI, and select the current profile - in this example, Default.
   

   Image RemovedImage Added

2. Use the Profile drop down to select a new profile.
   

   Image RemovedImage Added

3. Select OK to save, and change profiles.
   

   Image RemovedImage Added

System Menu 

1. Go to System Menu>Settings>System Settings>System Profiles. 

2. Available profiles are listed in the System Profiles table.

3. In Edit mode, select a profile from the Current Profile Name dropdown, then select Save. The System Profile has now changed.
   

   Image RemovedImage Added

Adding a New Profile

...

1. Go to System Menu>Settings>System Settings>System Profiles. 

2. In Edit mode, select the Add System Profile button .
   

   Image RemovedImage Added

3. The Add System Profile window will open. Name and ID your profile. Select OK.
   

   Image Removed

   
   

   Image Added

4. The new profile will appear in the System Profiles table. Select Save. Currently, it will be as blank as a Default profile, so you must next configure the profile.
   

   Image Removed

   
   

   Image Added

Configuring a Tracking Parameter Profile

1. Enable the Config Function, then select a Tracking Parameter in the Configuration Tree.
   

   Image Removed

   
   

   Image Added

2. In the Configuration Panel, select Profiles. 
   

   Image Removed

   
   

   Image Added

3. A new window, Tracking Parameter Profiles, will appear. 

4. If no profile has as yet been added, the table will be empty, because the Default profile does not appear, as it is locked from configuration. Default values will always be 0. 

5. However, in this example, we have added a new profile. Select New Profile in the table, then select Add.
   

   Image Removed

   
   

   Image Added

6. The Tracking Parameter Profile delta options will appear. Input your global delta changes.
   

   Image Removed

   
   

   Image Added

7. 1. Plot Amplitude ATI (pwr): 2 

   2. Plot Amplitude Track (pwr): 4

   3. Min Plot Azimuth Size (°): 1

   4. Min Plot Range Size (m): 1 

   5. Min Plot Weight ATI (cells): 5 

   6. Coasts (hits): 4

   7. Clutter Hold Multiplier: 2

   8. Max. Tracking Speed (m/s): 0

   9. Min.Tracking Speed (m/s): 1For example, below, if New Profile is the current profile, then this Tracking Parameter, Highways Debris, will actually use these settings:

   

8. Select Save.

...