...
Select the Profile button in the main application title bar. The button will display the name of the currently selected profile i.e. Default.
Use the Profile drop down to select a new profile:
Select OK to save, and change profiles.
You will see a notification informing you the profile has changed and the profile name will name be displayed on the Profile button
...
Go to System Menu>Settings>System Settings>System Profiles.
In Edit mode, select the Add System Profile button:
The Add System Profile window will open.
enter the Name and ID of your profile and select OK.
The new profile will appear in the System Profiles table.
Select Save. Currently, it will be as blank as a Default profile, so you must next configure the profile.
...
Enable the Config Function, then select a Tracking Parameter in the Configuration Tree.
In the Configuration Panel, select Profiles.
A new window, Tracking Parameter Profiles, will appear.
If no profile has as yet been added, the table will be empty, because the Default profile does not appear, as it is locked from configuration. Default values will always be 0.
However, in this example, we have added a new profile. Select the new profile (in this case Light Rain) from the table, then select Add.
The Tracking Parameter Profile delta options will appear. Input your global delta changes.
Please refer to the Tracking Parameters for more information about these settings.
Select Save when finished.
...